The Junior X jacket is made of double canvas with Finnish top-grip rubber for best durability and highest quality. The jacket is anatomically cut for the best fit. This jacket can grow with the shooter, which means you do not need to buy a new jacket all the time but can easily adjust this jacket as needed in at least three (3) sizes for length and/or circumference.
Glove Size Guide – Used to Measure for all Monard Gloves: Including Junior, Full and Half Finger (to get an accurate size, you need to measure in centimeters) Note: Do NOT pull the tape tight. Round up to the next Centimeter. Pick the high side of the measured value. If you measure and select a glove within the chart, you will get a Glove that is very tight but will go on. If you pick a size larger, you get a little less tight and so on. Use this guide as a starting point. Example: if you measure and get 24.5 cm, use 25 as your measurement. Since the Large glove is 23-25cm and the XLarge glove is 25-27, I recommend choosing either the XL or XXL glove depending on the fit you like.
Measured Size = Very Tight. Very Hard to get on
Measured Size +1 = Medium Tight, Looser fit, but still a bit hard to get on
Measured Size +2 = Low Tight. Easier to get on
Once you have made your suit selection someone will have to measure you. The best way to make sure you get the perfect fit is to have a conversation with us before going further. Contact me by phone: 720-670-6818 orEmail: firstname.lastname@example.org. If we can not do the measuring, read our Measuring for Custom Clothing page, download the appropriate forms and fill in the forms. Please contact us for any questions that come up. I would rather talk 1000 times than order a suit that does not fit. Someone once said “Measure twice, cut once”
If you are looking for a little extra excitement, you can add some Letters.