air rifle
Showing 1–10 of 11 results
-
Tec-Hro 70g Barrel-Weight for Air-Rifles
$34.00 Add to cartTec-Hro 70g Barrel-Weight for Air-Rifles
This barrel-weight is made of stainless steel and weighs 70g. For optimization of the rifle-balance and is mountable at the whole length of your barrel. Fits all barrels with a diameter of 20mm Feinwerkbau, most Anschütz-rifles, Walther, Tesro)
$34.00 -
Tec-Hro Air Rifle Barrel Weight 90 g
$18.00 Add to cartTec-Hro Air Rifle Barrel Weight 90 g
This 90 g weight is made of stainless steel It is used to optimize the balance of your air rifle and can be attached to the entire length of the barrel. (match = runs with an outer diameter of 20 mm Feinwerkbau, Anschütz, Walther, TESRO)
$18.00 -
Walther Filling adapter 300 + 200 bar
$16.93 Add to cartWalther Filling adapter 300 + 200 bar
Walther filling adapter for use with all Walther 300 bar compressed air cylinders
$16.93 -
Walther Expert Hook Buttplate – complete with rods
$476.00 Add to cartWalther Expert Hook Buttplate – complete with rods
Walther Expert Hook Buttplate – complete with rods and arm for KK500
Interchangeable and adaptable for position and discipline.
LG 400, KK 300 Anatomic$476.00 -
Scatt WS1
$1,299.00 Add to cartScatt WS1
Available to be ordered. I usually get these in within one week and get them mailed to you soon after.
SCATT WS1 is an electronic training system with a wireless optical sensor for fixed target training. This dry-fire trainer is intended for indoor use. It can be used at real distances from 5 to 10 meters to electronic target frame and simulate dry-fire shooting up to 1000 meters.
The training system comes with an electronic target frame, into which a paper target is inserted (it can be hung on the wall, bullet trap or mounted on a tripod) It connects to the computer without requiring a separate power source. The paper target can be automatically scaled down in the SCATT Software and printed on a regular printer.
Electronic target frame can be used at distances from 5 to 10 meters, allowing you to train in different rooms using a single device. There are red and green light indicators at the top and the bottom of the frame for timed fire practice (e.g. for match pistol shooting).
The wireless optical sensor (model WS-03) mounts on the shooter’s gun. It precisely registers weapon’s alignment during aiming and at the time of the shot (release of trigger). The sensor weighs only 30g (including mounting system) and practically doesn’t affect the gun’s balance. Software allows automatic calibration of the sensor relative to the aiming axis, so there is no need for adjusting the sights of the gun. The sensor compensates rifle cant automatically!
The wireless WS-03 optical sensor has a built-in battery and can be recharged from the USB port of your computer. A full charge requires roughly 1.5 hours. The battery life is approximately 30 hours of continuous aiming (about 10,000 shots with an average time of sighting of 10s). When idle the sensor automatically switches to power saving mode.
You can also connect the optional trigger pressure sensor accessory SCATT WTS to the charging port of the WS-03. It will provide a graph of your trigger pull pressure.
The system comes with modern, user-friendly and functional software – SCATT Professional. It includes all the necessary features for training and analysis at the highest level.
$1,299.00 -
Hammerli AR20 Pro
From: $900.00 Select optionsHammerli AR20 Pro
Get the right start.
To get the right start in competition shooting, you need your own rifle, and the Hämmerli AR20 air rifle is the perfect choice. It has all you need for fun, and it will help you become a good marksman.A sophisticated match rifle.
The AR20 is a sophisticated sporting arm with a 300 bar compressed air system, an aluminum stock with a wide range of settings and a finely adjustable match trigger. It’s perfect in every detail, from the design to the accessories to the precision mechanism.• PRO Competition sight
• 4.5 mm (.177) pellet
• 300 bar compressed air system
• Aluminium stock with a wide range of settings
• Ambidextrous receiver and stock
• Variable stock length, cheek piece height, and fore-end height
• T-rail for three-position competitions
• Adjustable butt plate
• Ambidextrous cocking piece with release lever
• Wide loading recess with precision feed
• Lothar Walther match barrel
• WALTHER aluminum cylinder with pressure gauge
• Basic weight less than 4,000 g
• Includes sight and accessoriesFrom: $900.00 -
MEC – Air Rifle. Training and Competition
$61.00 Add to cart -
Custom Monard Air Rifle Only Suit
From: $656.00 Select optionsCustom Monard Air Rifle Only Suit
Prices shown are the base price. *Bonus* – Price shown includes free lettering on pants and Jacket.
Ask me about our “Test Suit” option.
Once you have made your suit selection someone will have to measure you. The best way to make sure you get the perfect fit is to have a conversation with us before going further. Contact me by phone: 720-670-6818 or Email: robert.oberle@oberleenterprises.com . If we can not do the measuring, read our Measuring for Custom Clothing page, download the appropriate forms and fill in the forms. Please contact us for any questions that come up. I would rather talk 1000 times than order a suit that does not fit. Someone once said “Measure twice, cut once”
If you are looking for a little extra excitement, you can add some Letters and Metal Buttons.
Sweden’s Jonas Edman wears the Air Rifle Suit. Edman was part of the winning team at the 1998 ISSF World Shooting Championships in Zaragoza Spain, received a gold medal in the 2000 Olympics in 50m Prone, and won the 2001 ISSF World Cup Final in Munich.
From: $656.00 -
Monard Half Finger Proliner Pro + Glove
$107.00 Select optionsMonard Half Finger Proliner Pro + Glove
Glove Size Guide – Used to Measure for all Monard Gloves: Including Junior, Full and Half Finger (to get an accurate size, you need to measure in centimeters) Note: Do NOT pull the tape tight. Round up to the next Centimeter. Pick the high side of the measured value. If you measure and select a glove within the chart, you will get a Glove that is very tight but will go on. If you pick a size larger, you get a little less tight and so on. Use this guide as a starting point.
Example: if you measure and get 24.5 cm, use 25 as your measurement. Since the Large glove is 23-25cm and the XLarge glove is 25-27, I recommend choosing either the XL or XXL glove depending on the fit you like.
Measured Size = Very Tight. Very Hard to get on
Measured Size +1 = Medium Tight, Looser fit, but still a bit hard to get on
Measured Size +2 = Low Tight. Easier to get on$107.00 -
Monard Top Grip Glove
$90.00 Select optionsMonard Top Grip Glove
Glove Size Guide – Used to Measure for all Monard Gloves: Including Junior, Full and Half Finger (to get an accurate size, you need to measure in centimeters) Note: Do NOT pull the tape tight. Round up to the next Centimeter. Pick the high side of the measured value. If you measure and select a glove within the chart, you will get a Glove that is very tight but will go on. If you pick a size larger, you get a little less tight and so on. Use this guide as a starting point.
Example: if you measure and get 24.5 cm, use 25 as your measurement. Since the Large glove is 23-25cm and the XLarge glove is 25-27, I recommend choosing either the XL or XXL glove depending on the fit you like.
Measured Size = Very Tight. Very Hard to get on
Measured Size +1 = Medium Tight, Looser fit, but still a bit hard to get on
Measured Size +2 = Low Tight. Easier to get on$90.00